Throttle Body Nozzle – 0.85 GPH (31608N)
$19.50
Throttle body nozzle attaches to Affinity EG Flexible Throttle Body Arm (31600FA) to allow exact positioning during gasoline fuel induction services. The 0.85 GPH nozzle is a multi-purpose flowrate and provides good induction service for common engine sizes.
Throttle Body Nozzle for:
Fuel Service Tool
(FST16 and FST24 #31608N)
Fuel Tool (FST16)
Fuel Tool (FST24)
RECOMMENDED CLEANERS
BY WYNN’S
- Designed to interchange with multiple nozzle options for the Flexible Throttle Body Arm
- Rectus male connector machined in the body
- Nozzle tips can be removed for cleaning or replacement
Flexible Throttle Body Nozzle Tool Sets:
31606B – 0.65 GPH Nozzle
31608B – 0.85 GPH Nozzle (Standard)
Nozzles Only:
31606N – 0.65 GPH Nozzle
31608N – 0.85 GPH Nozzle (Standard) – THIS PRODUCT
Flexible Throttle Body ‘S’ Tool Sets:
31606S – 0.65 GPH Nozzle
31608S – 0.85 GPH Nozzle (Standard)
Induction ‘S’ Tool Only:
31606A – 0.65 GPH Nozzle
31608A – 0.85 GPH Nozzle (Standard)
Additional information
| Weight | 0.2 lbs |
|---|
Service Instructions
FOR FUEL INJECTION:
① Depressurize tool before removing fill cap. Fill with injection cleaner.
② Attached required fuel injection adapter to vehicle and service tool. Disengage vehicle fuel pump.
③ Set tool pressure required for engine. Open service hose valve and start engine. Run all cleaner until engine stops.
④ Remove tool & fuel injection adapter. Re-engage fuel pump.
FOR FUEL INDUCTION:
① Depressurize tool before removing fill cap. Fill with injection cleaner.
② Attach “S” Tool or Flex Nozzle Tool for induction service.
③ Close service hose valve and set tool pressure to 60 psi.
④ Install “S” tool in fresh air tube at throttle plate, or set Flex Nozzle Tool from throttle plate with fresh air tube removed (disconnect MAF sensor).
⑤ Run service on warm engine at 1200 RPM. Blow out 3-4 times during service to strip soot/carbon and clear induction system.
⑥ After service, run 10 min. then drive briskly to clear induction system.
⑦ Reconnect MAF sensor and clear any engine codes.
Only logged in customers who have purchased this product may leave a review.
Related Products
-
Fuel Service Tool (FST16)
$250.00 -
Fuel Service Tool (FST20)
$383.50 -
Fuel Service Tool (FST24)
$515.00 -
Fuel Vacuum Tool (FVT16)
$150.00 -
Fuel Injection Service Manifold 5/16″ & 6 MM (FISA0056)
$97.50 -
Fuel Injection Service Manifold 3/8″ & 5/16″ (FISA0035)
$97.50 -
Master Fuel Injection Kit (FIKM000)
$492.70 -
Minor Fuel Injection Adapter Kit (FIK38516)
$162.50 -
O-Ring Replacement Kit (ORKF000)
$11.64 -
Universal Vacuum Tip Kit (UVTK000)
$75.35
Reviews