Fuel Service Tool (FST)

Name: Fuel Service Tool (FST)
SKU: FST
Availability: InStock

$250.00 – $643.50

The multipurpose, Affinity EG Fuel Service stand-alone tool can be used to clean both gasoline fuel induction systems through the throttle body and fuel injectors/combustion chambers when connected to the fuel rail. This professional-grade tool is designed with a clear tank to allow the cleaner level to be monitored during the service.

Clear

SKU: FST Category: Fuel Tags: _Tools, Fuel Service Tool

Patented: US Pat. Nos. 11,079,018, 11,662,021 - US Des. Pat. Nos. D927,636, D958,927, D958,528

16, 20 or 24 oz cleaner capacity

Compact, robust design

RECOMMENDED CLEANERS

BY WYNN’S

FOR INDUCTION – Wynn’s® Clean-Sweep^TM Intake/Induction Cleaner (ZW69116)

FOR INJECTION – Wynn’s® V.I.C. (ZW61510)

Find a Wynn's Distributor

Features of Fuel Service Tool (FST):

Our most durable, professional grade fuel service tools
Clear tank allows fuel cleaner level to be monitored during service
Gold anodized flanges help tech identify color coded tool for fuel service
Service valve to control process flow of the fuel system cleaner
Rectus style, female quick connect for adapter connection
Dual pressure gauges allows monitoring rail pressure while setting tool service pressure (if when used with valved service hose adapter or Schrader valve)
Flat tank bottom (FSTD16, FST20, and FST24) allowS the tool to be filled/serviced while sitting on a table
For fuel induction service use Affinity EG flexible fuel induction service ‘S’ adapter #31608S (not included)
For fuel injection service use Affinity EG fuel injection kit #FIKM000 (not included)

Additional information

Weight	N/A
OZ	16 oz, 16 oz Dual, 20 oz, 24 oz

Service Instructions

FOR FUEL INJECTION:

① Depressurize tool before removing fill cap. Fill with injection cleaner.

② Attached required fuel injection adapter to vehicle and service tool. Disengage vehicle fuel pump.

③ Set tool pressure required for engine. Open service hose valve and start engine. Run all cleaner until engine stops.

④ Remove tool & fuel injection adapter. Re-engage fuel pump.

FOR FUEL INDUCTION:

① Depressurize tool before removing fill cap. Fill with injection cleaner.

② Attach “S” Tool or Flex Nozzle Tool for induction service.

③ Close service hose valve and set tool pressure to 60 psi.

④ Install “S” tool in fresh air tube at throttle plate, or set Flex Nozzle Tool from throttle plate with fresh air tube removed (disconnect MAF sensor).

⑤ Run service on warm engine at 1200 RPM. Blow out 3-4 times during service to strip soot/carbon and clear induction system.

⑥ After service, run 10 min. then drive briskly to clear induction system.

⑦ Reconnect MAF sensor and clear any engine codes.

Reviews

Only logged in customers who have purchased this product may leave a review.