Brake Adapter Swivel Hose (BASH)
This optional swivel hose connector can be installed on any of the Affinity Engineering Group brake adapters when a connection to the standard swivel connector is blocked.
This Brake Adapter Swivel Hose is used with:
Any Affinty Engineering Group brake adapters (BAK8 and BAK5R ) with the Affinity Engineering Group Brake Service Tool (BST32 and BST64)
This is sold as a single item.
RECOMMENDED BRAKE FLUIDS
The optional Brake Adapter Swivel Assembly connector can be used with any of the Affinity Engineering Group brake adapters and in conjuction with the 2″ extenstion:
- Brake Adapter Kit – 5 Adapters (Ring style plus BA01 and BA05) (BAK5R)
- Brake Adapter Kit – 8 Adapters (Probe Style) (BAK8)
- Brake Adapter 2″ Extension (can be stacked) (BA2X)
- Brake Adapter Swivel Hose (BASH) THIS PRODUCT
FOR BRAKE SERVICE:
Remove the existing connector and install the Brake Adapter Swivel Hose. Tighten snuggly to avoid leaks.
① Depressurize tool before removing fill cap.
② Use new brake fluid with vehicle’s DOT rating. Do not intermix incompatible brake fluids.
③ Use dry air source only. Drain tool filter if required.
④ Set service pressure between 15 psi and 20 psi for normal service. Some systems may require higher. High pressures may damage brake fluid reservoir.
⑤ Install reservoir adapter and check for leaks.
⑥ Use manufacturer’s recommended brake bleed sequence. Fluid level label measures volume dispensed to each wheel.
⑦ Test brakes when complete…..before moving vehicle.
Only logged in customers who have purchased this product may leave a review.