Brake Adapter Swivel Assembly (BASA)

FOR BRAKE SERVICE:

Remove existing connector and replace with the new BASA swivel connector.  Tighten snuggly to avoid leaks.

① Depressurize tool before removing fill cap.

② Use new brake fluid with vehicle’s DOT rating. Do not intermix incompatible brake fluids.

③ Use dry air source only. Drain tool filter if required.

④ Set service pressure between 15 psi and 20 psi for normal service. Some systems may require higher.  High pressures may damage brake fluid reservoir.

⑤ Install reservoir adapter and check for leaks.

⑥ Use manufacturer’s recommended brake bleed sequence. Fluid level label measures volume dispensed to each wheel.

⑦ Test brakes when complete…..before moving vehicle.