Ford 6.0L Powerstroke Intake/Exhaust Adapter (ZW21002)


Adapter for:
EGR Tool (EGR64)
Part #: ZW21002

Features of Ford 6.0L Powerstroke Intake/Exhaust Adapter (ZW21002):

This adapter needs to be used with the following components for Ford 6.0L Powerstroke service:

  • Diesel Induction and EGR Service Tool (EGR64)
  • EGR Manifold Assembly (ZW21001)
  • Ford 6.0L Powerstroke Intake/Exhaust Adapter (ZW21002) – THIS PRODUCT

Additional information

Weight .95 lbs
Dimensions 6 × 4 × 3 in
Service Instructions

(must use specific engine job aids for all details):

① Remove the tool fill cap and fill tool with water-based cleaner.

② Install the exhaust and intake adapters.

③ Attach the adapters to the Affinity EG service manifold and connect the manifold to the Affinity EG Diesel Induction & EGR Service Tool.

④ Start the engine and bring to normal operating temperature.

⑤ Set tool pressure to 50-60 psi & open the Exhaust valve to run 32 oz of cleaner through the exhaust system.

⑥ Rotate the manifold valve to the exhaust setting and increase engine to 1500 RPM.  Run the remaining 32 oz through the induction system.

⑦ Run the engine 10 minutes after the cleaner is consumed and remove adapters.  Drive vehicle to clear/remove any loosened soot.

⑧ Run DPF regeneration cycle if required


Only logged in customers who have purchased this product may leave a review.

    Your Cart
    Your cart is emptyReturn to Shop