Power Bleed Brake Service Tool (BST32)
$515.00
The 32 oz Affinity EG Power Bleed Brake Service Tool is an innovative, lightweight design that allows a single tech to provide fluid service exchange. Whether partial bleeding or complete fluid exchange, the tool provides a quick, professional service.
RECOMMENDED BRAKE FLUIDS
BY WYNN’S
- Pressure exchange of conventional, hybrid and EV brake fluid systems
- Single tech operation
- Clear tank allows fluid level to be monitored during the service
- Violet anodized flanges help tech identify color coded tool for brake fluid service
- Internal, low fluid shut-off valve
- Compact, lightweight design can be stored in work area
- Low cost, professional, pressurized fluid exchange
- Coalescing filter to remove air contaminants
- Flat tank bottom allows the tool to be filled/serviced while sitting on a table
- Not recommended for DOT 5.0, silicone based brake fluids
- Use with Affinity EG #BAK8 or #BAK5R brake adapter kits (not included)
Additional information
| Weight | 5 lbs |
|---|
Service Instructions
FOR BRAKE SERVICE:
① Depressurize tool before removing fill cap.
② Use new brake fluid with vehicle’s DOT rating. Do not intermix incompatible brake fluids.
③ Use dry air source only. Drain tool filter if required.
④ Set service pressure between 15 psi and 20 psi for normal service. Some systems may require higher. High pressures may damage brake fluid reservoir.
⑤ Install reservoir adapter and check for leaks.
⑥ Use manufacturer’s recommended brake bleed sequence. Fluid level label measures volume dispensed to each wheel.
⑦ Test brakes when complete…..before moving vehicle.
Only logged in customers who have purchased this product may leave a review.
Reviews