FOR BRAKE SERVICE:
BRAKE ADAPTER OPERATION FOR BRAKE FLUID SERVICE:
① Remove the existing brake reservoir cap.
② Identify the correct adapter for the brand of vehicle being serviced.
③ Insert the Affinity Engineering Group brake adapter and tighten the serrated nut to create a pressure tight seal inside the reservoir neck.
④ If the brake service tool or machine can not easily be connected to the brake adapter swivel connector, consider using either the brake adapter swivel hose (BASH) or brake adapter 2″ extension (BA2X) to position the connector in a more accessable location.
⑤ Connect the brake service tool or machine to the brake adpater and open the valve to check for leaks.
⑥ Refer to instructions for the brake service tool/machine to perform the brake fluid exchange service. Use manufacturer’s recommended brake bleed sequence.
⑦ Test brakes when complete…..before moving vehicle.