Rapid Evacuation Tool (RETX)
$170.00 – $325.00
Professional, rapid evacuation shop tool, orange anodized flanges.
Includes 3/8″ OD and 1/4″ OD step-down tubes to access smaller ports.
- Professional, durable design
- Clear tank allows tank fluid level to be seen
- Lever handle valve provides simple, easy process control and convienient holding during use.
- Outlet ball valve allows quick change between vacuum and pressurizing the tank.
- Can be used as a simple driveline service tool.
- Evacuate cleaning fluids used for clean engine repairs.
- Safely depressurize cooling system through overflow port. Evacuate overflow tank and refill with new coolant.
- Top off any automotive fluids.
- Multi-fluid tool can be used with any automotive service fluid.
- Pneumatic powered service tool for both vacuum and pressure
- Fluid can be drawn in with suction, rotate ball valve and pressure to evacuate the tool
- Can be used to remove old fluid from vehicle or used to top-off vehicle with new fluid.
- Tool operates at full line pressure to provide high vacuum, extra-rapid fluid evacuation
- Robust, 150 psi tool design pressure.
- Lever handle valve provides simple operation and ease of use.
- Caution when emptying tool. Feather lever gently to avoid spraying when tool empties.
- 1/4 turn ball valve on vacuum block provides quick, simple way to empty the tool.
- 40” long, 9/16” OD x 3/8” ID clear service hose.
- Includes an internal, high fluid level, shut-off to help prevent over filling.
- Tool can be hung by cable or positioned upright on the flat bottom for storage.
- Offered in multiple tool volume sizes. BSVT16 is available for brake fluid services.
Service Instructions
EVACUATION SERVICE:
① Connect lever valve to compressed air source.
② To evacuate, open the ball valve on the vacuum generator block.
③ Insert the clear service tube into fluid being evacuated.
④ Press lever valve until the tool is full or evacuation complete.
⑤ Stop evacuation when fluid level in the tool is within 2” of the top.
EMPTY TOOL:
① Connect lever valve to compressed air source.
② To empty, close the ball valve on the vacuum generator block.
③ Insert the clear service tube into an appropriate waste container.
④ Hold service tube firmly & lightly flutter actuate the lever valve until the tool is empty. Avoid fully pressurizing the tank.
⑤ Caution: Once tank is empty, compressed air will blow until tank is depressurized. Quickly rotating ball valve will help.
Only logged in customers who have purchased this product may leave a review.
Reviews